Show your support for Sam Willoughby and his "Strength for 91" campaign with these limited edition alloy end caps.
These 6061-T6 Alloy Snap Caps are designed to replace the ODI Snap Caps included with any ODI Lock-On Grip System grips and provide the highest level of protection available for your bars and grips. 100% of proceeds will go the "Strength for 91" Road 2 Recovery fund. Limited quantities will be available so get them while they are still in stock.
To provide additional support or to see the latest updates on Sam's recovery efforts, please visit www.strengthfor91.com.
- Compatible with all ODI Lock Jaw Clamps that Accept Snap Caps
- Sturdy 6061 Aluminum Construction
- Laser Engraved "Strength for 91"
- The Highest Level of Protection for your Grips and Bars
- 100% of the Proceeds will go to Support Sam Willoughby's Road 2 Recovery campaign.
The ODI Oversized Handlebar Mounts are designed to replace your stock OEM 7/8 Handlebar Mounts when upgrading to “oversized” 1-1/8” Diameter Handlebars such as the ODI CFT Podium or Podium FLIGHT Handlebars. They can be used for standard or “Rubber Mounted” Triple Clamps found on Honda and Kawasaki Motocross and Off-Road Motorcycles.
BAR MOUNT FEATURES:
- Made from sturdy 6061 grade alloy for improved strength and durability
- Chamfered clamp surface reduces handlebar stress on impact
- Throttle Tube Included with Snap On Cam to match more models
- Designed to fit both standard and rubber mounted triple-clamps
- Includes the following mounting hardware:
QTY X 2 M12-70mm long chromoly hex-head bolts
QTY X 2 M12-50mm long chromoly hex-head bolts
QTY X 2 M12 lock washers & nylon lock nuts.
• Please refer to your owner’s manual for specifications regarding OE torque settings. Should your rubber mounted cones show signs of wear or deterioration, replace them prior to installation. Always be sure all bolts are secure and checked for proper tension and alignment.Learn More
Free Shipping Via US Mail.
Replacement bolts for ODI Lock-On Grip System compatible grips.
- Includes one set of 4 Bolts
- Available for ATV, MTB/BMX, PWC, or MX (Note: MX includes 2 bolts only)
- FREE! Shipping via US Mail. (Limit one set per order. Select USPS shipping option at checkout)
**Note: Please select the correct application below**Learn More
ODI Lock Jaw Clamps are designed exclusively for use with the ODI Lock-On Grip System. Avialable as replacement parts or color coded add-on. Available in nine anodized colors to match your motif.
- Part of the Patented Lock-On Grip System
- Includes Set of 4 Clamps, Bolts and SNAP CAP End Plugs
- Compatible with MTB, BMX, ATV Lock-On Grips
- Now available in 9 Colors
Our new patented SNAP CAP end plugs offer improved protection for your Lock-On grips. Constructed out a specially formaulated nylon material designed to allow the plug to slide upon impact instead of grabbing as aluminum materials do. The SNAP CAP plugs also eliminate the annoying hassle of losing your plugs. They have been designed to snap directly into the Lock Jaw Clamps which locks the plug into place when tightened onto the bars. All around the best end plug around and we have included them for free with every set of Lock-On Grips.
- Heavy-Duty Construction
- Snaps Directly Into Lock Jaw Clamps
- No Tools Required
- Sold in Pairs
**NOTE: May not be compatible with some older models of Lock-On Grips. To find out, check for a groove on the inside diameter of your Lock Jaw Clamps. If your clamps have the groove, then they can accomodate the SNAP CAPS.**Learn More
Protect your bars and grips with ODI Aluminum End Plugs. Constructed of sturdy 6061 aluminum, these plugs are designed to take the brunt of whatever you can throw at them. Available in anodized black or silver.
- Sturdy 6061 Aluminum
- Fits most sized bars
- Triple-Core Design Holds Plugs Inside Bars
- Sold in pairs